Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

verification on bandwidth consumtion calculation

hello

i would like to know if these values (for frame header ) are correct while calculating a per voice bandwidth usage...

for the frame header :

14 bytes for Ethernet L2 headers, including 4 bytes of Frame Check Sequence (FCS) or Cyclic Redundancy Check (CRC) , 8 bytes of preambleand , 12 byte inter-frame gap.

(38bytes total ) .

for ethernet medium.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: verification on bandwidth consumtion calculation

18 bytes for Ethernet L2 headers, including 4 bytes of Frame Check Sequence (FCS) or Cyclic Redundancy Check (CRC).

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

use bandwidth calculator.

1 REPLY
Bronze

Re: verification on bandwidth consumtion calculation

18 bytes for Ethernet L2 headers, including 4 bytes of Frame Check Sequence (FCS) or Cyclic Redundancy Check (CRC).

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

use bandwidth calculator.

248
Views
0
Helpful
1
Replies
CreatePlease to create content