If the call is going directly into voicemail, then it should answer on the first ring.
What type of interface do you have on the VG200? A VIC-2FX0-M1 with caller ID enabled will not even pickup the line until the 2nd ring, which may explain the 3rd/4th ring.
Other than that, It sounds like the first port isn't answering, and the Forward-No-Answer timer sends the call to the 2nd port where it is answered. Take a look at Status Monitor on the Unity server to see which port picks up when this happens.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...