VG 224 config

[tomchan]

Try to config VG224, but without success. Below is the sample config file from CCO. http://www.cisco.com/univercd/cc/td/doc/product/access/vg/vg224/scg/scgappa.htm

Can someone post a workable VG224 config file? Thanks in advance.

[Chris Deren]

Do you have an MGCP or SCCP image?

If MGCP here is a config you could use:

!

version 12.3

no service pad

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname vg224

!

boot-start-marker

boot-end-marker

!

!

no aaa new-model

ip subnet-zero

!

!

ccm-manager redundant-host

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server

ccm-manager config

!

!

!

interface FastEthernet0/0

ip address x.x.x.x 255.255.255.0

duplex full

speed auto

!

!

control-plane

!

!

voice-port 2/0

!

voice-port 2/1

!

voice-port 2/2

!

voice-port 2/3

!

voice-port 2/4

!

voice-port 2/5

!

voice-port 2/6

!

voice-port 2/7

!

voice-port 2/8

!

voice-port 2/9

!

voice-port 2/10

!

voice-port 2/11

!

voice-port 2/12

!

voice-port 2/13

!

voice-port 2/14

!

voice-port 2/15

!

voice-port 2/16

!

voice-port 2/17

!

voice-port 2/18

!

voice-port 2/19

!

voice-port 2/20

!

voice-port 2/21

!

voice-port 2/22

!

voice-port 2/23

!

mgcp

mgcp call-agent 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax t38 inhibit

mgcp rtp payload-type g726r16 static

!

mgcp profile default

!

!

dial-peer voice 99920 pots

application mgcpapp

port 2/0

!

dial-peer voice 99921 pots

application mgcpapp

port 2/1

!

dial-peer voice 99922 pots

application mgcpapp

port 2/2

!

dial-peer voice 99923 pots

application mgcpapp

port 2/3

!

dial-peer voice 99924 pots

application mgcpapp

port 2/4

!

dial-peer voice 99925 pots

application mgcpapp

port 2/5

!

dial-peer voice 99926 pots

application mgcpapp

port 2/6

!

dial-peer voice 99927 pots

application mgcpapp

port 2/7

!

dial-peer voice 99928 pots

application mgcpapp

port 2/8

!

dial-peer voice 99929 pots

application mgcpapp

port 2/9

!

dial-peer voice 999210 pots

application mgcpapp

port 2/10

!

dial-peer voice 999211 pots

application mgcpapp

port 2/11

!

dial-peer voice 999212 pots

application mgcpapp

port 2/12

!

dial-peer voice 999213 pots

application mgcpapp

port 2/13

!

dial-peer voice 999214 pots

application mgcpapp

port 2/14

!

!

line con 0

transport preferred all

transport output all

line aux 0

transport preferred all

transport output all

line vty 0 4

password usg1pt

login

transport preferred all

transport input all

transport output all

!

!

end

[Ken Douglas]

Quick question... does this VG224 configuration support Fax services (we have to replace a large number of ATA186 units with the VG224, which will be on the same subnet as the CallManager).

[nathan.a.reeves]

As far as I know, yesm the VG224 supports Fax services. We've ended up using both, but actually found the ATA's to be more stable once we'd sorted out the clock slip on our E1. Just had some weird ones with the VG's where faxes stop answering until we restart them.

HTH

[oliver-jones]

I'm seeing the same thing, could you please advise on how you got around it, I sometimes find my ports freeze and a restart on each is required,

Kind Regards

Ollie

[us10610]

Yes the VG224 supports Fax services. We are replacing the ATA devices that are not able to do Super G3 faxing. I sure hope we don't have any new problems. We are using SCCP rather than MGCP on CCM 4.1.3. How about you?

[Ken Douglas]

UGH! Mine is STILL sitting in its box, brand new with the plastic still around it. And we just ordered $275K worth of CallManager 5.0 hardware and software (to upgrade from 3.3(4) version). We'll get to it... sooner or later and I'll let you know.

[us10610]

We're just testing too. I have 13 248's and 9 224's coming in March. These better work!! Anyway, here's the jist of skinny config that worked for me;

stcapp ccm-group 1

stcapp

!

voice-port 2/1

caller-id enable

!

voice-port 2/2

caller-id enable

!

sccp local FastEthernet0/0

sccp ccm 10.10.81.21 identifier 10 version 4.1

sccp

!

sccp ccm group 1

associate ccm 10 priority 1

!

dial-peer voice 101 pots

service stcapp

port 2/1

!

dial-peer voice 102 pots

service stcapp

port 2/2