Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG 248 using t.38 and modems

Hi,

Im tring to understand if vg248 supports t.38 for fax. The only document that describes vg248 mentions only cisco fax-relay, but from some discussions I see people talk of t.38. So does it support t.38?

And another question - if I have a vg248 and connect an analog phone to it and then I choose to use a modem or fax- do i need to reconfigure the port or it will work without the need to reconfigure it every time I change the connected equipment?

2 REPLIES
Cisco Employee

Re: VG 248 using t.38 and modems

Enabling T.38 Fax Relay http://www.cisco.mn/en/US/products/hw/gatecont/ps2250/products_configuration_guide_chapter09186a0080235150.html#wp1038128

"To use T.38 fax relay on the VG248, follow the steps in the procedure below...."

New Member

Re: VG 248 using t.38 and modems

and if I have non cisco gateway? nse force doesn`t look wery promising.

145
Views
0
Helpful
2
Replies