Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

qni
New Member

VG200 MGCP CCM

Can a VG200 be controlled by two seperate CCMs? Like to have redundancy so that both CCM can send calls to the single VG200.

1 REPLY
New Member

Re: VG200 MGCP CCM

If the Callmanagers are in the same cluster, there should be no issue with CCM redundancy, because the VG200 can belong to a Device Pool that references a CallManager group that has the prioritized list of two CallManagers. On the gateway itself, the secondary Callmanager is specified by the ccm-manager redundant-host x.x.x.x command. Since its one cluster, the gateway will handle calls from devices registered to either call agent.

If the Callmanger servers are in different clusters, then this will not work, because the MGCP gateway will only be able to register with one Call Agent at a time.

Regards

86
Views
0
Helpful
1
Replies
CreatePlease login to create content