Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG224 and VG248 power requirement

Would like to confirm the power requirement as below?

Power requirement of V224 is AC Input Voltage: 100 to 240 VAC and AC Input Current (max): 1 Amp

Power requirement of VG248 is AC Input Voltage: 100 to 240 VAC and AC Input Current (max): 4 Amp

Thank you.

1 REPLY
Hall of Fame Super Red

Re: VG224 and VG248 power requirement

Hi Tom ... from the VG248 Hardware doc:

The rear panel of the VG248 includes the power connector. The VG248 has a single AC inlet requiring 100- 240 VAC, 50-60 Hz. The VG248 draws approximately 176W at 100v in its maximum load condition.

Check out this link:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_installation_guide_chapter09186a00800878fe.html

Hope this helps!

Rob

501
Views
0
Helpful
1
Replies