VG224 box & analog phones with CCM3.3 - call problem
We have CCM3.3 at central location & at remote location with 2mb leased line have router & connected to LAN then VG224, analog phoenes.
Initially VG224 not reg, then it got reg with use of h323 procol config at both CCM & VG end.
Now 2 analog ph are connected at VG end and tring to call IP phone number which is got reg with CCM3.3.
Result: from analog ph able ring IP Phone but Ip phone cannot. And one more is from analog to IP Phone is one way, call initiator is getting voice from IP Phone. but IP Phones not able to hear anything.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...