Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 don't register ports

Hi

I have some VG224s and a CUCM cluster.

VG224 are using 15.1(4)M3

CUCM 8.0.3

I'm having trouble getting the VG224 to register the ports in CUCM using this:

sccp local FastEthernet0/0

sccp ccm 10.33.xxx.xxx identifier 4 version 7.0

sccp ccm 10.33.xxx.xxx identifier 3 version 7.0

sccp ccm 10.33.xxx.xxx identifier 2 version 7.0

sccp ccm 10.33.xxx.xxx identifier 1 version 7.0

But when i use this it works just fine:

sccp local FastEthernet0/0

sccp ccm 10.33.xxx.xxx identifier 4 version 4.1

sccp ccm 10.33.xxx.xxx identifier 3 version 4.1

sccp ccm 10.33.xxx.xxx identifier 2 version 4.1

sccp ccm 10.33.xxx.xxx identifier 1 version 4.1

The configuration should be using 7.0 when the CUCM is version 7 or newer.

Is this a  known bug?

Do i loose any features by running version 4.1?

/Tony

442
Views
0
Helpful
0
Replies
CreatePlease login to create content