07-24-2008 10:08 AM - edited 03-13-2019 05:30 PM
I am runnig UCM 5.1 with a 3825 router running MGCP (considering h323) with Callmanager Fallback. The router fallsback and works fine. My issue is I need a configuration for the VG224 running SCCP so that the Analog phones register to the router.
Solved! Go to Solution.
07-30-2008 02:30 PM
For step-by-step instructions to enable SCCP for analog FXS ports on a Cisco VG 224 voice gateway using Cisco Unified CallManager or Cisco Unified CME, refer to:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html
07-30-2008 02:30 PM
For step-by-step instructions to enable SCCP for analog FXS ports on a Cisco VG 224 voice gateway using Cisco Unified CallManager or Cisco Unified CME, refer to:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html
08-06-2008 11:28 AM
Thanks so much I guess I just wasn't using the right search criteria.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: