Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bronze

VG224 to Bogen TamB paging not working.

Can anyone give me any insight to why a VG224 would not work with a Bogen TamB paging device. An ATA does work but I was in the process of replacing all the ATA's at this particular location with the vg224 and I have 2 separate TamB's for two separate paging zones and neither of them work with the Voice Gateway 224. I call the DN and it answers the call but I dont hear the announcement beep that you would normally hear and my call terminates. I hooked the ATA back up temporarily but need to get it working wiht the vg224. I have another VG224 working at another location talking to a TamB but as far as I can tell with the same configuration. I am sure it is going to be some minor tweak to do with ring timing or something like that.....

1 REPLY
Bronze

Re: VG224 to Bogen TamB paging not working.

Adding the command no battery-reversal on the voice-port could solve the problem

730
Views
0
Helpful
1
Replies
CreatePlease to create content