Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

VG224 with SCCP

VG224 won't accept the "stcapp" command. IOS says it supports this command (12.4.2 T1), but still can't configure for SCCP.

1 REPLY
Green

Re: VG224 with SCCP

Good reference:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t2/ht1vg224.htm#wp1027265

Here is a sample config for one of my VG224s

stcapp ccm-group 1

stcapp

!

sccp local FastEthernet0/1

sccp ccm 192.168.1.30 identifier 2 priority 2 version 4.1

sccp ccm 192.168.4.20 identifier 1 priority 1 version 4.1

sccp

!

sccp ccm group 1

associate ccm 2 priority 2

associate ccm 1 priority 1

!

!

dial-peer voice 20 voip

!

dial-peer voice 1 pots

service stcapp

port 2/0

177
Views
0
Helpful
1
Replies
CreatePlease to create content