Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG248 ethernet is dropping

I have 4 VG248s going to a C2950G-48 switch. One of the VG248s will show that it's ehternet port has reset, but the switch logs doesn't show that port going down. The switch port is set to 100/full and the VG248 is also 100/full. I've changed cables, moved to another port, and changed the speed - after which the VG248 will be stable for a couple of days, then go back to dropping the ethernet port. The other 3 VG248s haven't had this problem. I know it looks like a hardware problem on the VG248, but why wouldn't the C2950G-48 show the port dropping also? The VG248 is running 1.1(2) and the switch is running 121-6.EA2a. Thanks

Mark

4 REPLIES
Silver

Re: VG248 ethernet is dropping

Maybe the VG248 is misbehaving without giving any indications on the wire which goes undetected by the switch.

New Member

Re: VG248 ethernet is dropping

I installed about 18 of these gateways for a customer and would see the same log message all of the time, but never had a complaint or encountered one that gave any indication of a malfunction. I quit worrying about it. Is yours actually malfunctioning or just showing this log entry?

New Member

Re: VG248 ethernet is dropping

When the ethernet drops, the feature keys quit working and I have to restart the vg248 to to make them work. No one has complained of dropped calls, so I'm guessig that the only issue is with the function keys, but that is enough. Do you lose the function keys?

Thanks

Mark

Re: VG248 ethernet is dropping

Have you tried upgrading the firmware to 1.2.1? It certainly improved a number of things for me. In particular fax/modem relay now works going to my 3660.

106
Views
0
Helpful
4
Replies