cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
435
Views
0
Helpful
2
Replies

VG248 RING FREQUENCY

beburns
Level 1
Level 1

How can I change the ring frequency for a VG248? The analog phones that are having the problems are 2,000ft away from the VG248. Please respond.

Thanks

B

1 Accepted Solution

Accepted Solutions

CCampbell_2
Level 1
Level 1

On the VG248 you can't. Ring frequency, ring voltage, idle voltage are all fixed.

Ringing and Idle Voltages on Cisco FXS Interfaces Link:

http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_tech_note09186a008011c7f3.shtml

View solution in original post

2 Replies 2

acampbell
VIP Alumni
VIP Alumni

You can try changing country code for the ports this will change the ring cadence :-

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_guide_chapter09186a0080117ea2.html#69548

Regards, Alex. Please rate useful posts.

CCampbell_2
Level 1
Level 1

On the VG248 you can't. Ring frequency, ring voltage, idle voltage are all fixed.

Ringing and Idle Voltages on Cisco FXS Interfaces Link:

http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_tech_note09186a008011c7f3.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: