Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VG248 RING FREQUENCY

How can I change the ring frequency for a VG248? The analog phones that are having the problems are 2,000ft away from the VG248. Please respond.

Thanks

B

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: VG248 RING FREQUENCY

On the VG248 you can't. Ring frequency, ring voltage, idle voltage are all fixed.

Ringing and Idle Voltages on Cisco FXS Interfaces Link:

http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_tech_note09186a008011c7f3.shtml

2 REPLIES
Green

Re: VG248 RING FREQUENCY

You can try changing country code for the ports this will change the ring cadence :-

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_configuration_guide_chapter09186a0080117ea2.html#69548

Regards, Alex. Please rate useful posts.
New Member

Re: VG248 RING FREQUENCY

On the VG248 you can't. Ring frequency, ring voltage, idle voltage are all fixed.

Ringing and Idle Voltages on Cisco FXS Interfaces Link:

http://www.cisco.com/en/US/customer/tech/tk652/tk653/technologies_tech_note09186a008011c7f3.shtml

230
Views
0
Helpful
2
Replies
CreatePlease to create content