I am getting conflicting information concerning BRI and VOIP. I require multiple simultaneous voice calls over a backup BRI DDR connection.Am I correct in the assumption that a VIC BRI is only used when requiring a standard basic voice connection to the ISDN2 i.e 2 or 4 channels, and if multiple voice calls are required a WIC should be used with VOIP and RTP compression etc. Or is the WIC BRI not capable of connecting to ISDN2 and carrying voice calls?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...