Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
ns
Community Member

VIC-2FXO-M1 in Europe

Hi,

Can the M1 version be used in the EU? The only evident difference between the M1 and M2 seems to be that the M1 version supports the groundstart mode + the loopstart and the M2 card only the loopstart mode.

Does any other differences exist?

Thanks,

Niels

1 REPLY
Anonymous
N/A

Re: VIC-2FXO-M1 in Europe

A Foreign Exchange Office (FXO) interface connects local calls to a central office or PBX. This is the interface a standard telephone provides.

The VIC-2FXO and VIC-2FXO-M1 interface cards are intended for use in North America (United States, Canada, and Mexico).

The VIC-2FXO-EU and VIC-2FXO-M2 interface cards are intended for use in Europe.

The VIC-2FXO-M3 interface card is intended for use in Australia.

The VIC2-2FXO and VIC2-4FXO interface cards are software-configurable for all regions

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_installation_guide_chapter09186a008007cb4c.html#wp1023564

284
Views
0
Helpful
1
Replies
CreatePlease to create content