I'm hoping that I am missing something because this seems like a strange request. Are you saying that you want a 4520 MCU to outdial to a preset group of endpoints when a completely separate PVDM3-based ad-hoc conference is started? The answer to this would be no.
What may be possible would be to join the H323 ID/E164 ID of the 4520 conference to the PVDM3-based ad-hoc conference by calling it and using the Join button on the Cisco phone. If that worked, the obvious downside would be that you have a cascaded conference across two MCUs. Each MCU would make its own active speaker decisions and feed only that output to the other bridge.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...