Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Video freezes

Windows 98

IP/TV 3.0

When watching a video the video starts dropping frames on the client side. The symptoms are similar to a machine that cannot process the video fast enough. The machine more than meets specs though. 866proc/256ram. Any ideas?

3 REPLIES
New Member

Re: Video freezes

Possibly the machine buffer is running out of packets. This can be caused by excessive lost packets and/or lattency on the network links. Is it on a WAN link? If so look at distributing the video (if on demand) out to the edge. IP/TV servers support that.

New Member

Re: Video freezes

Its a gigabit network. The network side looks okay, PDU's lost is not excessive nor does it correspond to the jerky video. TAC engineer suggests it's a problem with the client.

New Member

Re: Video freezes

I had the same issue and discovered, with the help of TAC, that I neede to lower my frame rate from 384 to 300 on my MCU service profile. My ISDN gateway folks had no problem with each other untill they hit the MCU then the "freezing" began.

101
Views
0
Helpful
3
Replies