Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

vidoe conferecing by two seperate CME

Hi All;

I am using two CME that connected to two different service provider. I am trying to have video conferencing (VT advantage) by these two CME when I dial from one phone to the other phone, but video is no working. I turned off the firewall but still video is not showing anything. very appreciate if you can solve this problem.

thanks

Alex

1 ACCEPTED SOLUTION

Accepted Solutions

Re: vidoe conferecing by two seperate CME

You need to enable H323 slow start for video to work.

voice class h323 1

call start slow

voice service voip

supplementary-service h450.12 advertise-only

## this command is required to preserve video calls over a h323 trunk.

telephony-service

video

maximum bit-rate 384

service phone videoCapability 1

create cnf

ephone 10

video

dial-peer voice 1 voip

destination-pattern <>

session target ipv4:

voice-class h323 1

show call active video to verify the call info.

HTH

Sankar

PS: please remember to rate posts!

3 REPLIES

Re: vidoe conferecing by two seperate CME

You need to enable H323 slow start for video to work.

voice class h323 1

call start slow

voice service voip

supplementary-service h450.12 advertise-only

## this command is required to preserve video calls over a h323 trunk.

telephony-service

video

maximum bit-rate 384

service phone videoCapability 1

create cnf

ephone 10

video

dial-peer voice 1 voip

destination-pattern <>

session target ipv4:

voice-class h323 1

show call active video to verify the call info.

HTH

Sankar

PS: please remember to rate posts!

Re: vidoe conferecing by two seperate CME

Alex,

So did that help ? Is video working or still having issues ?

Sankar

New Member

Re: vidoe conferecing by two seperate CME

Hi Sankar;

very appreciate that was very helpful and video is working now without problem. Also I already rate your suggestion.

thanks

118
Views
0
Helpful
3
Replies
CreatePlease login to create content