Virtual Channel Table (Logic Channel Number) in DCM9900
I would like to configure the DCM9900 (v. 10.0.02) in order to arrange the position where every channel will be tuned in our STB customers. I've read the manual and it seems that VCT (or LCN in some networks / literature) is not compatible under the DVB standard.
Is there any way to configure VCT / LCN in DCM9900? Why is it compatible/configurable under ATSC and not in DVB networks?
(Cable)VCT is very useful for TV network operators as we can configure the position of every TV channel tuned in the customer Set Top Box.
Could someone gime me some help ? Maybe it's necessary to have ROSA system installed to configure DCM (don't have it).
Virtual Channel Table (VCT)
The CVCT (Cable VCT) and TVCT (Terrestrial VCT) provide information for all virtual channels in a transport stream like: major and minor channel numbers, short channel name, and information for navigation and tuning.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.