Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

vlan

Dear sir,

Anyone know how to create :-

1.) voice vlan ?

2.) data vlan ?

Please advise. thanks.

3 REPLIES
Hall of Fame Super Silver

Re: vlan

What switch do you have?

You create both the same way, if you have older generation switches ie 2950, 3500 you do the following:

switch#vlan database

switch#vlan 1

with newer 3550/3560/3750 you can do it from config mode

switch#config t

switch(config)#vlan 1

If you have multiple switches make sure to do the above on the vtp server switch.

to assign the VLANs to devices that plug into the switchports do the following:

older generation:

switchport mode trunk

switchport trunk encapsulation dot1q

switchport access vlan 1

switchport voice vlan 2

newer switches:

switchport mode access

switchport access vlan 1

switchport voice vlan 2

Chris

Community Member

Re: vlan

Hi chris & everybody,

thank you for your sharing, please advise me how to create the voice vlan? is it like we configure at the ipipgateway or voice gateway:-

switch#voice vlan database

switch#voice vlan 11

please advise.

Hall of Fame Super Silver

Re: vlan

The voice VLAN is no different than regular VLAN, simply create it as you would date vlan.

You tell the switch that it is a voice vlan when you apply: "switchport voice vlan 11" to the switchport.

HTH,

Chris

110
Views
0
Helpful
3
Replies
CreatePlease to create content