I currently have a QSIG trunk connected to our Nortel PBX, and when calls are forwarded to Voicemail from the MGCP gateway, the calling number is being truncated to 4 digits. I am trying to track down where this might be occuring and any suggestions would be greatly appreciated. Attached is a copy of a 'debug isdn q931' which shows the truncation.
PLEASE DISREGARD: Found the problem in a Calling Party translation that was put in for the Pilot VM Number.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...