Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VOICE Home Lab

Hi,

I have a couple of c2600 routers, VoIP IOS, Call manager software and Cisco ip phone software, my question: can i make calls between 2 PC equipped with PC-based ip phones ?

Think you in advance

3 REPLIES

Re: VOICE Home Lab

Yes you can.

Download IPCommunicator, IPBlue. If you have two PC's you can have up to 4 phones. If you have a real IP phone or an analog port on a VG248, you can control that port using Cisco IP Softphone. This will give you control over the IP phone or analog port (to dial out, receive calls etc) remotely from the PC. This gives you a total of 5 soft phones.

Re: VOICE Home Lab

Yes you can. This can be accomplished with IP Communicator. Please see the admin guide below. You didn't mention switches, but you will need a switch to connect the routers, servers, phones, and PCs. In the case of 2 IP Communicators talking on the same LAN, the routers would not be in the picture.

http://www.cisco.com/en/US/products/sw/voicesw/ps5475/products_administration_guide_book09186a00801e8bd2.html

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: VOICE Home Lab

Do you have call manager running on a server? You would

have to use ip communicator on your pc.

98
Views
8
Helpful
3
Replies