We have no ACD ability, so I have a hunt group set up with 3 extensions (one each as second line on each of 3 phones). If no one is available on any of the hunt extensions, I want it to go to a shared voice mail box.
Can anyone help me know if this is do-able and how (nothing I've tried has worked!). Using CM 6.1/Unity 5.0
This is most possible :) I'm going to add a touch to the great info from Tere (+5 points for this Tere)
In this example we are going to do what you are trying to do as well as Light the MWI Lamp on the phones within the Line Group when a Message is left for the group.
Lets say the Hunt Pilot number is 5000 and one of the second line DN's on the Line Group member phones is 2355. Set the Hunt Pilot to Forward (CFNA) to the Unity Pilot #.
If you don't use a Routing Rule as nicely suggested by Tere you can Create a mailbox for 2355 with 5000 as an Alternate Extension. When the call routes through to Unity via the Hunt Pilot No Answer Unity should see the CLID of 5000 which will then be connected to the Mailbox on 2355. This will take care of one of the Line Group Member phones but we want to light the Lamp on the second and third phone as well :)
Try setting the the DN's of the other two Line Group members as Alternate MWI's (in Unity) as well;
Setting Up Alternate MWIs for Extensions on the Same Phone System
Cisco Unity can activate alternate MWIs for extensions on the same phone system. Note that depending on the phones and phone systems, some additional phone system programming may be necessary. Refer to the installation guide for the phone system.
To enable alternate MWIs for extensions on the same phone system, do the following procedure for each subscriber who needs alternate MWIs.
To Set Up Alternate MWIs for Extensions on the Same Phone System
Step 1 In the Cisco Unity Administrator, go to the applicable Subscribers > Subscribers > Messages page.
Step 2 Confirm that the Use MWI for Message Notification check box is checked.
Step 3 Click the Add button located beneath the MWI Extensions table to add a row to the table. By default, the first row in the table contains an "X" to indicate the primary extension assigned to a subscriber. If you want one more extension and do not need to activate the MWI on the primary extension, you can also modify the first row.
Step 4 Enter the applicable extension in the Extension field of the table. MWIs are automatically enabled for all rows in the table. When entering characters in the MWI Extensions table, consider the following:
â¢Enter digits 0 through 9. Do not use spaces, dashes, or parentheses.
â¢Enter , (comma) to insert a one-second pause.
â¢Enter # and * to correspond to the # and * keys on the phone.
Does anyone know how to do this CME and CUE? Would be nice to light the MWI. I'm thinking based on what I've read that you must create a dummy ephone-dn and use that as the 'final' in the ephone-hunt group. I'm sure there's another way to skin this cat, I just haven't found it.... yet.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...