CCM 3.1<br>Unity 3.0<br>TSP 3.0.2<br>40 ports<br><br>I have a 40 port Voice Mail only integration. The problem I am having is that I am able to dial the first voice mail port successfully. While the first port is utilized, I try to dial the first VM port again and I get a "Fast Busy". <br><br>I can dial each individual port with success. What is not working is the Call Forward Busy to the next port in line. I have checked and double checked COS and partitions in CallManger and do not see anything wrong. Is there a known bug with this TSP and port hunting.<br><br>I have tried to test the TSP in Unity and all looks good. Within perf mon on CCM (Cisco Lines) all the voice mail DN's are registered. <br><br><br><br>
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...