02-20-2002 12:47 AM - edited 03-12-2019 02:29 PM
Hi!
I need to have some graph/table to know how much voice ports on gateway is (was) in use. Right now I trying to implement very complex method with Perl to SNMP to get each port status and Perl to analyze results of SNMP requests... But may be anybody knows something less complex? Is there any MIB to monitor such a thing?
Regards,
Alexander.
03-12-2002 10:00 AM
Well I looked deeper and seems like you can pull more info using the "transmission.dialControlMib" this MIB will tell you how many calls are active on the router and their corresponding states. It seems a little hard to correlate which call is on which Serial port but I'm sure there is a way. Also the "enterprises.cisco.ciscoExperiment.ciscoVoiceCommonDialControlMIB" has some OIDs you might be interested.
03-11-2002 09:47 AM
you can check this link, I think it can help you to find the mib to check and pass the info to your SNMP graph software wherever it is:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/dialsol/nmssol/mrtg.htm
greetings !!
03-12-2002 07:09 AM
NO,
it contains only modem ports - not voice.
Anybody knows why Cisco has MIBs for modems and has not the same for voice ports?
03-12-2002 07:50 AM
Read it carfully, It contain the MIBS for Digital Voice ports, I already use them and work perfect.
try to do a snmpwalk and confirm the info you get.
04-18-2002 02:55 PM
folks: here is an app that one of the computer geeks wrote for us. it monitors a h323 gateway. try it , if you wish you are welcome to write and get the guy to customize it. it is getting most of the data I needed out of the gateway.
goto Mortal X Software and download Gateway Analyzer.
thanks marc
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide