Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

voice port not appear in running-config

Hi all,

I have problem with my C3660.

I want to configure this router as voice gateway.

But unfortunately, my voice port doesn't appear when I type "sh run".

But it is detected when I issue command "sh ver" and "sh diag".

My voice modul using 4 PORT Voice PM for MARs Port adapter (2FXS and 2FXO).

Thanks for any help.

ari

6 REPLIES
Hall of Fame Super Gold

Re: voice port not appear in running-config

Are there the DSP on the NM ? Check show diag.

New Member

Re: voice port not appear in running-config

I'm using this module

Slot 3:

High Density Voice Port adapter

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 1.1

Top Assy. Part Number : 800-XXXXX-01

Board Revision : G0

Deviation Number : 0-0

Fab Version : 02

PCB Serial Number : JABXXXXXXXX

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 00 CC 41 01 01 C0 46 03 20 00 0D EF 01

0x10: 42 47 30 80 00 00 00 00 02 02 C1 8B 4A 41 42 30

0x20: 35 34 36 30 43 4E 42 03 00 81 00 00 00 00 04 00

0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:

T1 (1 Port) Multi-Flex Trunk WAN Daughter Card

Hardware revision 1.0 Board revision A0

Serial number 27XXXXXX Part number 800-03568-03

Test history 0x0 RMA number 00-00-00

Connector type PCI

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 20 01 00 01 9F DA 68 50 0D F0 03 00 00 00 00

0x30: 50 00 00 00 01 11 08 00 FF FF FF FF FF FF FF FF

HDV firmware: Compiled Mon 26-Nov-01 16:24 by miriyala

HDV memory size 524280 heap free 202857

Hall of Fame Super Gold

Re: voice port not appear in running-config

Seems like there are no DSP on it.

For sure no FXS/FXO ports.

New Member

Re: voice port not appear in running-config

Kindly find sh diag attachment

I have same 2 devices (Router 3660), one is work, but not for the other.

Re: voice port not appear in running-config

What IOS feature set are you using? Are they feature sets or versions different between the top routers?

New Member

Re: voice port not appear in running-config

Using c3660-ik8s-mz-122-6c-M1.bin for both

Seems like the problem is on NM voice module (2V).

What do you think ?

267
Views
0
Helpful
6
Replies
CreatePlease login to create content