Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Voice Translation on CCM 4.13 for blocking inbound calls based on CLID

Telemarketers. Need I say more?

Want to block inbound calls on our Cisco CallManager 4.1.3 system. Yeah, the smarter telesalesdroids will fuzz their CLID data, but there's enough dumb ones out there to make this desirable.

Document ID: 64020, Number Translation using Voice Translation Profiles

http://tinyurl.com/zbvdy

warns against using both 'old' and 'new' translation. Doesn't say what old is, and doesn't show the way to determine how I might set that up, either.

How does one add Voice Translation Profiles?

Thank you kindly.

  • Other Collaboration Voice and Video Subjects
1 REPLY

Re: Voice Translation on CCM 4.13 for blocking inbound calls bas

Tranlation rules are applied to translation profiles. Translation profiles are applied to dial peers or voice ports. Please see the following link for configuration details. Specifically, take a look at the Reject Calls section.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

Hope this helps. If so, please rate the post.

Brandon

128
Views
3
Helpful
1
Replies