I am using 3750 stacks in the access closet with the floor VLANs routed through a 4500. I am trying to determine the best way to get the Nortel IP phone to attach to the voice VLAN and have the internal port default to whatever the floor VLAN is. I am using Microsoft DHCP and I will not initialy trust the port but use a policy to set the trusts. Does anyone use Nortel and what do you believe is the best way to set this? Are there any documents anyone may be aware of to lead me in the right direction?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...