Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VOIP Call Manager across WAN.

I have two location which have 180 IP phones each.

I like to put a call manager at each location, will this pose a problem due to synchronization accros the WAN by the way the WAN link is 10MeG.

How often does the call manager Sync and can that be controlled.

5 REPLIES
New Member

Re: VOIP Call Manager across WAN.

Im not sure if Cisco have put up any guidelines on a WAN connection yet, but yes it can be done, with Cisco's approval we were the first site to do it, but you need to have QoS implemented on the WAN link.

Your probably best logging a TAC case to find out if there is any advice on QoS for your set-up.

Cisco Employee

Re: VOIP Call Manager across WAN.

I think your cisco account team should have all the information that you will need to do the clustering over the wan. You may want to talk to the to get the information.

Thank you,

-Mckee

New Member

Re: VOIP Call Manager across WAN.

What is the bandwidth between the sites? What QoS did they have you apply to approve it?

My understanding of the problem is not that database replication consumes a large amount of bandwidth, but that there are some timers that are sensitive to delays in updates... what was your problem?

New Member

Re: VOIP Call Manager across WAN.

The QoS you apply all depends on your set-up, in our case we had 2 * 8mb HSSI links in Cat6k's

The bandwidth between the two sites was 2mb for voice which was plenty, we had 800 users on one side of the WAN and 2,500 on the other side.

We did'nt have any problems with the set-up.

New Member

Re: VOIP Call Manager across WAN.

Will the two locations be in one CM cluster or will they be seperate? (ie- Site A has Publisher, Site B has Subscriber)

162
Views
0
Helpful
5
Replies
CreatePlease login to create content