I am in the process of designing a VoIP WAN network - 30 Cisco 1601 routers as access and 3 core cisco 3640's - I will be using VG200's on all sites with NM-2v and FXS. What QoS configurations can I apply on the 1600's and to what IOS must I upgrade to - this is the first phase , second phase will be to move to IPT. Is it an option for me to replace all the 1600's with 1751-V/1760-V becoause of the VOX software for IPT? It is more cost effective NOW because the VG200 is a lot cheaper than replacing all the routers with 1700's (WIC-1T etc).Please help
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...