Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VoIP digit/number translation

I have 2 router talking voip to each other.

I want to make a voip call from router 1 by dialing 001006613900000 which matches the outbound voip dial-peer with a destination-pattern 00100661

On router 2 I want to inbound voip dial-peer with incoming called-number 61396900000 to be matched, so when this dial-peer runs its application the application sees the inbound number only as 613900000. So the number needs to be translated before hitting the inbound voip dial-peer.

I have read the Cisco doc's on number translation but still need some assistance or an example.

thanks,

Brett

2 REPLIES
Silver

Re: VoIP digit/number translation

What yopu need to do is create a translation rule on router 1, which would look something like this :

translation-rule 1

rule 1 ^0010066 6

This will replace the string 0010066 with 6 and not touch anything that follows that. SO when you dial 001006613900000 u will get 613900000 as a result. Then you apply this rule to your dial-peer :

translate-outgoing called 1

New Member

Re: VoIP digit/number translation

check out the num-exp command I have use that to change incoming and outgoing numbers.

91
Views
0
Helpful
2
Replies
CreatePlease login to create content