I've got a cust with 2x2MB serial links connecting two offices. I'll be using a gatekeeper.. Is it best to multilink voice traffic or have one link for voice and the other for data? Are there links to assist with configuration?
whether you should designate links for voice and data I guess depends on the number of calls that will be going across the wan. If you are going to have 2 voice calls at max then you would waste a lot of bandwidth if you separate your links.
With LLQ and multilink you would never have a wasted bit of bandwidth, so you should really go with mlppp (this is just how I would do it).
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.