Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VoIP from CCM to PSTN via BRI w/o CLID in show isdn history

This is VIC2-2BRI-NT/TE configured as h323 and connected to CCM 4.2.1

Now. When call going from PSTN to gateway im able to se called and calling #.

But when calls going from VoIP/CCM there are only "---N/A---" mark.

Are there any solution that outging calls will be recorded in show isdn history with called/ing numbers?

For example:

--------------------------------------------------------------------------------

ISDN CALL HISTORY

--------------------------------------------------------------------------------

Call History contains all active calls, and a maximum of 100 inactive calls.

Inactive call data will be retained for a maximum of 15 minutes.

--------------------------------------------------------------------------------

Call Calling Called Remote Seconds Seconds Seconds Charges

Type Number Number Name Used Left Idle Units/Currency

--------------------------------------------------------------------------------

In 666666212 555551718 28

In 666666212 555551712 6

In 666666212 555551718 11

Out ---N/A--- ---N/A--- 28

--------------------------------------------------------------------------------

2 REPLIES
New Member

Re: VoIP from CCM to PSTN via BRI w/o CLID in show isdn history

Give the command " show isdn history ". You will find the results there.

New Member

Re: VoIP from CCM to PSTN via BRI w/o CLID in show isdn history

As you can see on sample for incoming calls

there are callin/ed number for outgoing there is:

Out ---N/A--- ---N/A--- 28

in show isdn history results.

8-(

106
Views
0
Helpful
2
Replies
CreatePlease to create content