Cisco Support Community
Community Member

VoIP Issues

I am in the process of implementing VoIP in my 512Kbps leased line between two of my offices. I need 12 Concurrent Voice sessions shoud be there between these two offices. If i select 2 Slot voice network module add 2 Voice e/m - Connecting to PABX -in each slot, so i will be getting 4ports.

I dont want to use three slots like this to achieve my 12 Concurrent voice session. Which module will be the best one for this configuration...Please Suggest..


Re: VoIP Issues

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

CreatePlease to create content