09-06-2007 12:29 PM - edited 03-15-2019 04:55 AM
I have a 3660 that has a CTI PRI card in it...I can configure the controller part fine and the serial interface is created...but I don't get a voice-port. Is it possible to use this card as a connection to a telco provided PRI for outbound calls. I have done this in the past with MFT cards and would like to be able to use this extra equipment.
I have updated the ios and it doesn't appear to help...
Thanks,
Joe
Solved! Go to Solution.
09-06-2007 12:38 PM
No, you cannot use the NM-1CT1 for voice.
You will need something like NM-HVD to support voice on the 3660, or AIM-VOICE-30 and VWIC card in an NM module.
Hope this helps, please rate post if it does!
09-06-2007 12:38 PM
No, you cannot use the NM-1CT1 for voice.
You will need something like NM-HVD to support voice on the 3660, or AIM-VOICE-30 and VWIC card in an NM module.
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide