I have a point to point connection between two offices in different countries (256kbps), running VoIP, one site using FXS cards and the other one using E1 card. We´ve tried several QoS configurations and employees from site A can hear employees from site B but unfortunately it doesn´t happen the other way.
When I do an extended ping between both routers, it shows: round-trip min/avg/max = 572/587/853 ms
Is this time that bad in order to cause such a bad quality?
Is your problem solved.I would request you to please let me know the soution incase it has been solved.And would request Cisco to kindly publish the solved cases as like this one so that it will be a good databse of known and solved problems and helps all.Or if it is already there may I I have the URL please for the same.Thanks...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...