We've set debitcard system with cisco AS5350 and radius server.
When everything goes fine (radius server returns access-accept packet code 0)
the TCL script playes every IVR that it is supposed to play .But when the radius returns access-reject packet (code 255 ?? isn't it) without any other attributes the TCL script always plays the same message - en_no_aaa.au.The big quiestion here is : What are the attributes expected by the TCL script in the access-reject packet and can we send any VSA attributes in this packet?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...