Has anyone else ran into the problem where VTA 2.02 will not work on a Point to Point call on the local LAN with both phones being on the same cluster. However it works when calling across the WAN to other clusters and will work when calling intra-cluster when calling to a phone running 1.02 VTA.
IP phone A call IP phone B -- on same cluster both clients running VTA 2.02 = Audio only no video
IP phone A call IP phone B -- on same cluster one client running VTA 2.02 and the other running 1.02 = video and Audio work.
IP phone A call IP phone B -- on different clusters both clients running VTA 2.02 = Audio and video work great.
Problem seems to be only when a VTA 2.02 client calls another 2.02 client on the same cluster.. This is happening on multiple clusters.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...