VPM is the voice port module, the state machine that controls the voice ports and VTSP is the telephony state machine, a layer deeper than VPM.
We don't generally provide customers with documentation on the internal functions of gateways and routers. You can get a good idea of what these are doing by running 'debug vtsp all' and 'debug vpm all', do this on a lab router or one where you can make sure that you will only see one call at a time.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...