04-20-2009 04:08 AM - edited 03-13-2019 06:16 PM
dears,
i am trying to initialize cisco unity express to connect it to call manager express, but when i enter to configure callManager. and enter the web username and password and JTAPI user the following is displayed:
saved successful
web login failed. Error while determining CCM version -1
JTAPI login failed. Error while determining CCM version -1
can anyone help??
Thanks
Solved! Go to Solution.
04-20-2009 05:12 AM
Hi Moustpha,
Yes, this should show (when integrating with CME);
Application mode: CME or CCME
You can download the proper license for CME from the page I linked on the first post :)
Hope this helps!
Rob
04-20-2009 04:27 AM
Hi Moustapha,
Here are some examples of where I think this went wrong. You may be trying to use the wrong License file;
For Callmanager (which I think you have used)
cue-vm-license_12mbx_ccm_3.0.2.pkg
License information package for a 12-mailbox version of the Cisco Unity Express with VoiceMail application that works with Cisco Unified CallManager. For all Cisco Unity Express modules: AIM-CUE, NM-CUE, NM-CUE-EC & NME-CUE.
For Callmanager Express - CME (which I think you need)
cue-vm-license_12mbx_cme_3.0.2.pkg
License information package for a 12-mailbox version of the Cisco Unity Express with VoiceMail application that works with Cisco Unified CallManager Express. For all Cisco Unity Express modules: AIM-CUE, NM-CUE, NM-CUE-EC & NME-CUE
From this link;
http://www.cisco.com/cgi-bin/tablebuild.pl/cue-302-licenses
Hope this helps!
Rob
04-20-2009 05:02 AM
Hi Rob,
I have the following licenses:
CUE#sh software licenses
Installed license files:
- voicemail_lic.sig : ENGINEERING 12 MAILBOX LICENSE
Core:
- Application mode: CCM
- Total usable system ports: 6
Voicemail/Auto Attendant:
- Max system mailbox capacity time: 840
- Default # of general delivery mailboxes: 5
- Default # of personal mailboxes: 12
- Max # of configurable mailboxes: 17
Interactive Voice Response:
- Max # of IVR sessions: Not Available
Languages:
- Max installed languages: 1
- Max enabled languages: 1
Does this line "Application mode: CCM" means that i have the wrong license.
If not how can i check which license file am i using?
Your reply is really appreciated
Thanks
04-20-2009 05:12 AM
Hi Moustpha,
Yes, this should show (when integrating with CME);
Application mode: CME or CCME
You can download the proper license for CME from the page I linked on the first post :)
Hope this helps!
Rob
04-20-2009 05:52 AM
i downloaded the license
cue-vm-license_12mbx_cme_7.0.1.pkg
and it solved the problem, but i am not able to add a voice-mail application, and it is displaying:
Error: operation not allowed with this current installed license
Please advice
Moustafa
01-11-2012 10:27 PM
Hi Moustafa
The license can't be change between CCM and CME support without a fresh install of the Cisco Uinty software.
Thanks
Alkaff
01-12-2012 11:39 AM
Abdo Ahmed Saleh Al-Kaf wrote:
The license can't be change between CCM and CME support without a fresh install of the Cisco Uinty software.
Incorrect. With recent CUE versions, mode can be changed with GUI.
Administration -> Control Panel -> Call Agent Integration.
09-23-2011 03:55 PM
Hi Rob
I have a similar issues between CUE 8.5 with CUCM 8.5. All I have as permanent license is 16 ports because I am using the system as auto attendant. I have no voicemail license. Would having no voicemail license cause the issue?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: