Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

web login failed on cue

dears,

i am trying to initialize cisco unity express to connect it to call manager express, but when i enter to configure callManager. and enter the web username and password and JTAPI user the following is displayed:

saved successful

web login failed. Error while determining CCM version -1

JTAPI login failed. Error while determining CCM version -1

can anyone help??

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: web login failed on cue

Hi Moustpha,

Yes, this should show (when integrating with CME);

Application mode: CME or CCME

You can download the proper license for CME from the page I linked on the first post :)

Hope this helps!

Rob

7 REPLIES
Hall of Fame Super Red

Re: web login failed on cue

Hi Moustapha,

Here are some examples of where I think this went wrong. You may be trying to use the wrong License file;

For Callmanager (which I think you have used)

cue-vm-license_12mbx_ccm_3.0.2.pkg

License information package for a 12-mailbox version of the Cisco Unity Express with VoiceMail application that works with Cisco Unified CallManager. For all Cisco Unity Express modules: AIM-CUE, NM-CUE, NM-CUE-EC & NME-CUE.

For Callmanager Express - CME (which I think you need)

cue-vm-license_12mbx_cme_3.0.2.pkg

License information package for a 12-mailbox version of the Cisco Unity Express with VoiceMail application that works with Cisco Unified CallManager Express. For all Cisco Unity Express modules: AIM-CUE, NM-CUE, NM-CUE-EC & NME-CUE

From this link;

http://www.cisco.com/cgi-bin/tablebuild.pl/cue-302-licenses

Hope this helps!

Rob

Re: web login failed on cue

Hi Rob,

I have the following licenses:

CUE#sh software licenses

Installed license files:

- voicemail_lic.sig : ENGINEERING 12 MAILBOX LICENSE

Core:

- Application mode: CCM

- Total usable system ports: 6

Voicemail/Auto Attendant:

- Max system mailbox capacity time: 840

- Default # of general delivery mailboxes: 5

- Default # of personal mailboxes: 12

- Max # of configurable mailboxes: 17

Interactive Voice Response:

- Max # of IVR sessions: Not Available

Languages:

- Max installed languages: 1

- Max enabled languages: 1

Does this line "Application mode: CCM" means that i have the wrong license.

If not how can i check which license file am i using?

Your reply is really appreciated

Thanks

Hall of Fame Super Red

Re: web login failed on cue

Hi Moustpha,

Yes, this should show (when integrating with CME);

Application mode: CME or CCME

You can download the proper license for CME from the page I linked on the first post :)

Hope this helps!

Rob

Re: web login failed on cue

i downloaded the license

cue-vm-license_12mbx_cme_7.0.1.pkg

and it solved the problem, but i am not able to add a voice-mail application, and it is displaying:

Error: operation not allowed with this current installed license

Please advice

Moustafa

web login failed on cue

Hi Moustafa

The license can't be change between CCM and CME support without a fresh install of the Cisco Uinty software.

Thanks

Alkaff

Hall of Fame Super Gold

web login failed on cue

Abdo Ahmed Saleh Al-Kaf wrote:

The license can't be change between CCM and CME support without a fresh install of the Cisco Uinty software.

Incorrect. With recent CUE versions, mode can be changed with GUI.

Administration -> Control Panel -> Call Agent Integration.

New Member

web login failed on cue

Hi Rob

I have a similar issues between CUE 8.5 with CUCM 8.5.  All I have as permanent license is 16 ports because I am using the system as auto attendant.  I have no voicemail license.  Would having no voicemail license cause the issue?

3634
Views
0
Helpful
7
Replies