What is needed to setup VoIP with Cisco Products

[gennadyd]

we are an internatiol Organation and would like to use Cisco phone Soution

what do i need to by

i need 40 to 60 phones

40 in house

10 sales office ( in US )

10 out side of us

Help

[parker.rick]

I would recommend:

1 Call Manager

1 Unity VoiceMessaging Server

1 2650 router with HDV and MFT modules

2 3524XL with power

2 4224 with voice modules

60 7960 telephones

[kennethh]

1. 1 CallManager(get 2nd one for backup if u want)

2. 60 7960 IP Phone (but 7960 IP Phone need IP address for each). U can use VG200 that need 1 IP address and have 4 ports (RJ11).

3. uOne for Voice Mail message(simple) or use Unity Voice message server(complex)

Of course you need switch and router.

Thats all.

We implement VoIP and VNP solution, if you have any questions, send me a email.

Ken

[Brian Carscadden]

1st step... You really need someone to do a thorough assessment of your network before choosing parts. IP Telephony is less tolerant of poor planning than any other WAN technology. If you're comfortable with your own network, start with a pilot call manager implementation. Make sure the user community has a thorough understanding of how these things work, what features they should expect, and the overall impact to the network.

Use the Cisco IP Telephony Network Design Guide as a starting point. You can also contact Cisco directly. I use Reseller Support at 800 553-6387. The voice people are very knowledgable.

Brian Carscadden

Sr. System Engineer

CCNA, CCDA, CIPT

TransNet Corporation