I have a callmanager at site A with a 4006 AGM using h323. I want to setup a callmanager at site B. I have a T1 line connecting A to B. How can I get site B to call out using site A's 4006 AGM. To throw a loop in things Call manager and 4006 AGM at Site A are on a private ip subnet. I have the 4006 management port nating with a real ip address. If I set Callmanager B on the real ip address, can I get them to talk. Would I need to use a gatekeeper?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...