Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Which IOS to use ???

HI ALL!

We have 5350 <-PRI-> Meridian 1.

5350 reboot 10/22/02 and 10/24/02

----------------------------------

as5350#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 5350 Software (C5350-JK8S-M), Version 12.2(2)XB, EARLY DEPLOYMENT RELEA

SE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Mon 15-Oct-01 22:25 by liha

Image text-base: 0x600089C8, data-base: 0x61600000

ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)

BOOTLDR: 5350 Software (C5350-BOOT-M), Experimental Version 12.1(20000922:142008

) [nag-flo_t_0110 101]

as5350 uptime is 8 minutes

System returned to ROM by bus error at PC 0x603D88F0, address 0xD0D0D1D at 17:20

:53 MSD Thu Oct 24 2002

System restarted at 17:22:26 MSD Thu Oct 24 2002

System image file is "flash:c5350-jk8s-mz.122-2.XB"

----------------------------------

Which of the following IOS to use instead current 12.2(2)XB ???

12.2(2)XB2

12.2(2)XB3

12.1(5).XM6

12.2(11).T

Plz, advise me !!!!

Thanks for ALL!

2 REPLIES
New Member

Re: Which IOS to use ???

We're using an AS5300 on 12.2(8)T5 for our telco voice gateway on enterprise code, works just fine.

-Jeff

New Member

Re: Which IOS to use ???

Hi,

12.2(11).T as it is latest, 12.2(2).XB3 mostly used for the AS53xx

but before have a look at the feature navigator to check the features that you require.

http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl

Regards

Viraj

112
Views
0
Helpful
2
Replies
CreatePlease to create content