I have 5 users that log onto an CUCM attendent console. They are located in different parts of the building. Is there a way for each of those users to see who is currently logged in.I am thinking either by a button assignment or plugin. If not for all users is there a way for 1 users to see who is logged into that AC_Group.
There is no facility built into AC to provide this information. It may be possible to get some of the information you require using performance and monitoring tools. For example the CUCM 6/7RTMT tool can provide stats on various AC data but is not really an end user tool.
The link below shows the AC stats that can be viewed:
Yes you can do this you have to be a bit creative and use https or a web page to display this real time info.:
The actual realtiem performace monitor field you need to look for is:
This counter represents the total number of Cisco Unified Communications Manager attendant console clients that are currently online. Attendant Console clients include all users that are configured in the Attendant Console User Configuration window in Cisco Unified Communications Manager Administration that are currently online. This number increases by one for each client that goes online and decreases by one for each client that goes offline.
Other related details are:
Cisco Unified Real-Time Monitoring
The RTMT runs as a client-side application and uses HTTPS and TCP to monitor system performance, device status, device discovery, CTI applications, and voice messaging ports. RTMT can connect directly to devices by using HTTPS to troubleshoot system issues. Cisco Unified RTMT performs the following tasks:
â¢Monitor a set of predefined management objects that monitor the health of the system.
â¢Generate various alerts, in the form of e-mails, for objects when values go over/below user-configured thresholds.
â¢Collect and view traces in various default viewers that exist in RTMT.
â¢Translate Q931 messages.
â¢View syslog messages in SysLog Viewer.
â¢Work with performance-monitoring counters.
In addition to SNMP traps, Cisco Unified RTMT can monitor and parse syslog messages that are provided by the hardware vendors, and then send these alerts to RTMT Alert Central. You can configure RTMT to notify the Cisco Unified CM system administrator when the alerts occur. The notifications can occur by using e-mail or Epage or both.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...