Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

why can't make multiple call via AS5300 single PRI

1) A PABX (with IP Card) connect to AS5300 via Ethernet connection. Any call from PABX (PRI) will throw to AS5300 via Ethernet connection.

2) AS5300 connect to PSTN.

Result: Single Call can be completed

Problem: Can't make multiple calls.

Question: How to allow multiple calls?


Re: why can't make multiple call via AS5300 single PRI

I would think the problem would be in the PBX IP card. The AS5300 would process any calls

received over IP and sent out through the PSTN

via the T1 or E1 PRI installed.

There are 24/30 channle for T1/E1 respectively so the AS5300

would be able to process simultanously 24/30 calls depending on which

signalling type either T1/E1.

I would check the IP cards to see if its well configured to forward more than one call.

I'm not familiar with the card mentioned but can assure you the AS5300 would forward any calls received

as long as there are free DS0's.

debug voip ccapi inout to see if other calls actually arrives

at the AS5300.