Hi ALL !
Plz, see our sh ver
-------------------------
as5350#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 5350 Software (C5350-JK8S-M), Version 12.2(2)XB, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 15-Oct-01 22:25 by liha
Image text-base: 0x600089C8, data-base: 0x61600000
ROM: System Bootstrap, Version 12.2(1r)1, RELEASE SOFTWARE (fc1)
BOOTLDR: 5350 Software (C5350-JK8S-M), Version 12.2(2)XB, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc2)
as5350 uptime is 11 hours, 8 minutes
System returned to ROM by bus error at PC 0x603D6A1C, address 0xD0D0D19 at 23:22
:01 MSD Thu May 23 2002
System restarted at 23:23:40 MSD Thu May 23 2002
System image file is "flash:c5350-jk8s-mz.122-2.XB"
cisco AS5350 (R7K) processor (revision T) with 131072K/65536K bytes of memory.
Processor board ID JAE0533056S
R7000 CPU at 250Mhz, Implementation 39, Rev 1.0, 256KB L2, 2048KB L3 Cache
Last reset from warm-reset
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x32,
Board Hardware Version 3.27, Item Number 800-5171-02,
Board Revision A0, Serial Number JAE0533056S,
PLD/ISP Version 2.2, Manufacture Date 19-Aug-2001.
Processor 0x14, MAC Address 0x0653454DEA
Backplane HW Revision 1.0, Flash Type 5V
2 FastEthernet/IEEE 802.3 interface(s)
64 Serial network interface(s)
60 terminal line(s)
2 Channelized E1/PRI port(s)
512K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
-------------------------
What is the error :
"System returned to ROM by bus error at PC 0x603D6A1C, address 0xD0D0D19 at 23:22" ?????
And how troubleshoot this bug ???
Thanks to ALL !
