cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
228
Views
0
Helpful
4
Replies

Win OS 2000.2.5 SR3

david.lawrence
Level 3
Level 3

Installed the above SR onto the publisher (CM3.3.3 SR1) with no problems. When I installed on the subscriber everything seemed to go ok, until the box rebooted. CM and various other CM related services failed to start. Eventually found the problem was that the NIC had been disabled. Reenabled and all services started ok. Everthing seemed fine afterwards.

Anyone else had this happen, or know what would have caused the issue?

TIA

D

1 Accepted Solution

Accepted Solutions

Found the following bug. Might be what you experienced??

Bug - CSCea75056

Release Notes

Symptom:

LAN connection is disabled intermittently after a Server reboot. CallManager,

Cisco TFTP, Cisco CTI Manager, and other services fail to start.

Workaround:

Re-enable NIC and restart the system.

View solution in original post

4 Replies 4

dugrant
Level 4
Level 4

What type of server? If it was a server with 2, which NIC were you using?

MCS-7835 with dual NIC. Using NIC 1 with NIC 2 not in use.

D

Found the following bug. Might be what you experienced??

Bug - CSCea75056

Release Notes

Symptom:

LAN connection is disabled intermittently after a Server reboot. CallManager,

Cisco TFTP, Cisco CTI Manager, and other services fail to start.

Workaround:

Re-enable NIC and restart the system.

Thanks for this. Exactly the problem I had. Strange that they have the status down as unreproducible. Still nice to see that not the only one who has had the problem.

thanks again

D