I am having WS-X6608-E1 module in 6509 cat ios switch. I would like to upgrade from cat ios to native ios.The above mentioned module won't support on native os.could any one can give me the equalent module which support native IOS.
You can use CMM module and insert up to 3 6 port t1/e1 port adaptors (WS-SVC-CMM-6x1) in them. These use native IOS and allow up to 18 ports per blade. You also have the option of installing a hardware transcoder card on the same blade.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...